How to Install a Sliding Window Air Conditioner

Published: 11th May 2010
Views: N/A

Appropriate sliding window air conditioner for personal use in a small apartment. These air conditioners also consume less energy than other models. It is the best option for cooling a small area or a small house with 1 or 2 rooms. You can install an air conditioner in the rooms of different individual, so you can adjust the temperature according to your preferences. Many people believe that the installation of an air conditioner requires a high level of expertise, but it is actually very easy to install an air conditioner in the context of sliding.



Precautions



Window air conditioners are heavy, so you need to make sure that you lift properly without putting too much pressure on any part of the body, which may injure you. Consideration of the size of the window before buying the air conditioner. With the right size, will be reducing the gap between window air conditioners, and trapping cold air in the room. This will ensure proper cooling of the room in a more effective way.

Tools and materials



* Screwdriver

* Support arc

* Level

Wood screws *

* Resistant to water infiltration

* Foam weather stripping

* Air-Conditioning



Step 1 - determine the window



First, decide on a framework within which you will use air conditioning. You should choose a window with an electrical outlet nearby, so air conditioning can be connected easily. Make sure the lack of furniture, near the window, which would impede air flow.

Step 2 - To ensure stability



You should check the window sill to ensure that it will be a stable base to keep the air conditioning. If it is corrupt or cracked, replace it before the air conditioner installed.

Step 3 - Install the brackets



Install metal support brackets that come with air-conditioning at the level where they are, respectively. Mounting brackets that come with air conditioning will be the nail in the center. You can adjust the nail on the level of parentheses.

Step 4 - Lift the air conditioner



Raise the air conditioning unit to slide in the support brackets.

Step 5 - the window of the demolition of



Mark the point where the air conditioning hit the window. Raise the window again, and then attach a strip of foam weather stripping along the line significantly. Withdrawal side extensions if there is whether there are gaps between the window frame and the sides of the unit. If necessary, attach the extensions on the side wall using wood screws.

Step 6 - Application blocking



Application blocking to the point where the window meets the window air conditioner so as to close the edges. This will ensure that no cold air escaping from both sides.



About Author

http://www.prohometips.com/ carries free home improvement advice, great remodeling tips , and appliance buying guides by leading home improvement authority, DIY expert and HGTV personality

For further detail about visit our website: http://www.prohometips.com/




Report this article Ask About This Article


Loading...
More to Explore